The center pivot system was developed within the United States in the middle of the 20th century. They proved to be superior to conventional methods of irrigation. They required a lesser amount of water, yet despite that, their energy consumption was much higher due to their method of operation.
How does a Center Pivot Irrigation System Works:
Center pivot irrigation was created to sprinkle water on crop plants using a circular fashion by using a movable and swinging arm that is attached to a pivot. These systems consisted of a radial pipe with nozzles pre-spaced to spread the water. As the arm moves around its central pivot point water is pumped through the nozzles in order to water the crops in a circular manner. However, there are so many online platforms where you can find a lot of valley center pivots for sale.
Image Source: Google
The layout is designed so that sprinklers located closer toward the pivot points and thus cover less ground space also have a lower flow rate than the nozzles located to the left of the pipe. These require a substantially higher stream rate in order to fill a greater surface.
Benefits Of Centre Pivot Irrigation Systems:
For large amounts of land that are used for agriculture pivot systems are the most effective method of irrigation. This type of system provides water to an enormous area in a short amount of time and also aids in spreading fertilizers as well as pesticides. The benefits of these systems are:
Apply the irrigation in a consistent manner
Reduce the demand for human labor
Use lower pressures to save energy
Reduce the risk of water run-off through more efficient use of water
The system can be programmed to let you irrigate your lawn on a predetermined time frame
Share this post: on Facebook on Google+